Simple Storage for the Utility Room

 Our utility room is a mess. We have loads of stuff that needs sorting and the storage is a mixture of old bits of furniture that was in the garage already and shelves that we brought with us or bought to try and make better use of the space. 

The first step was to improve the storage around the washing machine and freezer. This was going to take the shape of some custom made shelves the would store basic item including the cat baskets!

I made this is two parts, a deeper section with two fixed shelves and a shallower version with one fixed shelf and two adjustable shelves (I decided not to have the three I initially put in the drawing). 

In case you're interested the drawing software is Graphic for Mac. It's very useful for creating simple 2D drawings for this sort of project.

The units were built using pocket holes which presented a challenge in the narrow unit because I didn't think about the drill/driver being too big to get inside the unit with the pocket hole driver bit in it. 

I got there in the end, but it was a real faff. The shelf pin holes were made using a Kreg jig. This is a very useful tool. A simple spacer (a piece of ply cut to size) helps to position the jig at its starting point and then you can drill a series of holes equally spaced. If you need more there's a locating pin to reposition the jig. You just need to take your time setting things up properly. I got my jig for about £35.

We've recently bought a battery powered lawn mower so I've attached the charger to the end panel of the unit and the batteries live on the shelf with the charger and battery for the trimmer we were given years ago. This gives us a nice, convenient way to store and charge the batteries.

The next thing we decided to make was a storage unit to fit between the freezer and washing machine.

Nothing too complicated, just a pull-out unit with storage for washing powder, water softener etc. Again pocket holes were used to secure the bottom to the front and back panels, and 30mm brad nails for the rails. 

I found some old castors from a previous project and a handle from a wardrobe I dismantled 8 years ago. The wood from the wardrobe was used to build a cupboard to hide some pipes and to construct one of my benches, so nothing goes to waste if we can help it!

Once finished, the unit slides nicely between the two appliances.

The next job will be to sort out the rest of the storage, making better use of the space. We might even be able to get into the cupboards currently buried behind the stuff we haven't sorted out yet!!