I have two grandsons and decided to make a mud kitchen for them as a Christmas present. I toyed with the idea of taking a couple of pallets and cutting one down to make the top and sides and the other as the back. Instead of that I decided to make it from scratch using some pallet wood and some stud timber (CLS timber 63x38mm).
I started off with a simple drawing of what I thought it might look like and with some rough dimensions.
The basic construction used butt joint reinforced with through dowels. The back splash was a separate piece to make getting into a car easier. Although the finished piece was only 1m tall and about 770mm wide.
I took the stud timber and cut the pieces to length before running them through the table saw to square them up. The off-cuts formed the bottom shelf.
Once this was all dry it was sanded down and painted using a garden paint.
The top and backsplash were made from pallet wood. Several pieces were glued together to form the worktop. The backsplash was pinned and glued to the frame as individual strips.
A simple shelf was added with the "deliberate" mistake of putting the supports in the wrong place! Then more sanding and an exterior varnish to protect the wood.
Next I needed to make a sink and hob. The sink was made from a mixing bowl I picked up on Amazon. I drew round it then marked a line inset from the edge before cutting it out carefully with the jigsaw. The cut-out and a couple of other pieces of pallet wood were made into the hot plates.
There are many ways to cut circles, but one of the quickest I've found is to use the table saw. A simple jig allows you to trim away the edges. You just need to go carefully.
The control knobs were cut using a hole saw, a screw and washer allow them to turn freely. The finishing touch was to make the curved top and get a sign made. I used Etsy for the sign.
I'm really pleased with how this turned out. I ended up making a crate as storage space. I hope the boys enjoy playing with it as much as I enjoyed making it for them.
